Clean
the solution container with
clean water, fill with the
solution (Hand Sanitising
or Refreshing Deodorising)
and replace
Wait
for approximately one minute
for solution to flow to
the end of the hose
Before
fitting the towel, press
the nozzle for 20 seconds
to make the solution come
out of the nozzle
When
the solution container requires
refilling, the buzzer sounds
five times and the indicator
lamp starts blinking
Fitting
the towel
Open
the lid and lift the towel
cover, place the towel edge
on the roller and shut cover
When
the towel needs replenishment,
the buzzer will sound five
times and the signal will
disappear
To
prevent stoppages, it must
be ensured that the leading
edge of the towel is flat
and in line with the roller
Selecting
warm/cool water and connecting electricity
source
Confirm
the correct power source
If
the power is switched on,
a lamp will glow with an
audible signal
Select
the hot or cool switch as
per your requirement - the
green light is for cool
towel while the red light
is for hot towel
Check
the solution quantity by
pressing the button for
one piece of towel to be
discharged. If the solution
amount is not enough, adjust
the solution amount by regulating
the Solution Amount Controlling
knob, after opening the
front case
Towel
dispensing
To
release warm/cool towels,
press the touch button
You
can dispense 1,3 or 5 towels
at a time, by pressing the
appropriate button
